STEP * [04:59:16] build in hasher p8 ... Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P base dir found, add aptrepo rpm-dir file:/var/ftp/pub/Etersoft/Wine-vanilla/3.3/x86_64/ALTLinux p8 main Build in hasher: M80P for x86_64/ALTLinux/p8... Clean only the same names from hasher Note: run from source tree, datadir=/srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild, sysconfdir=/srv/builder-robot/Projects/etersoft-build-utils/etc LISTNAMES=/var/ftp/pub/Etersoft/Wine-vanilla/3.3/sources/wine-vanilla-3.3-alt1.src.rpm LISTARGS= Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P DISTRVERSION=p8 LISTRPMARGS= LISTNAMES=/var/ftp/pub/Etersoft/Wine-vanilla/3.3/sources/wine-vanilla-3.3-alt1.src.rpm ARGS= $ mkdir -p /tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS /tmp/.private/builder-robot/tmp.pCojSnwt8e/RPMS $ rpm -iv '--define=_topdir /tmp/.private/builder-robot/tmp.pCojSnwt8e' /var/ftp/pub/Etersoft/Wine-vanilla/3.3/sources/wine-vanilla-3.3-alt1.src.rpm wine-vanilla-3.3-alt1.x86_64 $ /srv/builder-robot/Projects/etersoft-build-utils/bin/rpmbps -b p8 /tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec Note: run from source tree, datadir=/srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild, sysconfdir=/srv/builder-robot/Projects/etersoft-build-utils/etc LISTNAMES=/tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec LISTARGS=-b p8 Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P Converting spec wine-vanilla.spec to p8 (M80P) ... $ set_release /tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec alt0.M80P.1 Checking req names for bison cabextract desktop-file-utils flex fontconfig fontconfig-devel gcc glibc-nss glibc-pthread jackit-devel libGL libGLU-devel libICE libICE-devel libSM-devel libX11 libX11-devel libXScrnSaver-devel libXau-devel libXaw-devel libXcomposite-devel libXcursor-devel libXdamage-devel libXevie-devel libXext libXext-devel libXfixes-devel libXfont-devel libXft-devel libXi libXi-devel libXinerama-devel libXmu-devel libXpm-devel libXrandr-devel libXrender libXrender-devel libXres-devel libXt-devel libXv-devel libXvMC-devel libXxf86dga-devel libXxf86misc-devel libXxf86vm-devel libalsa-devel libcups libcups-devel libdbus-devel libfontenc-devel libfreetype libfreetype-devel libgnutls-devel libgphoto2-devel libgsm-devel libieee1284-devel libjpeg libjpeg-devel libkrb5-devel liblcms2-devel libldap-devel libmpg123-devel libncurses libncurses-devel libncursesw-devel libopenal-devel libpng-devel libpng16 libpulseaudio-devel libsane-devel libssl libtiff-devel libtinfo-devel libudev-devel libunixODBC-devel libusb-devel libv4l-devel libwine-vanilla libwine-vanilla-gl libxml2-devel libxslt-devel perl-XML-Simple prelink rpm-build-intro udev util-linux webclient wine-gecko wine-mono wine-vanilla wine-vanilla-programs zlib-devel Use replacement file: /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.p8.x86_64-i586 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.x86_64-i586 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.p8 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.p7 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.p6 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.p5 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.c8 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.c7 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt.c6 /srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild/pkgrepl/pkgrepl.alt Use req rule s!(.*Req.*)liblcms2-devel( |,|}|$)!\1liblcms2-devel\2!g Use req rule s!(.*Req.*)libmpg123-devel( |,|}|$)!\1libmpg123-devel\2!g Use req rule s!(.*Req.*)libpng16( |,|}|$)!\1libpng15\2!g Use req rule s!(.*Req.*)libudev-devel( |,|}|$)!\1libudev-devel\2!g Use req rule s!(.*Req.*)libv4l-devel( |,|}|$)!\1libv4l-devel\2!g Use req rule s!(.*Req.*)rpm-build-intro( |,|}|$)!\1rpm-build-intro\2!g Checking group names for Development/C Emulators System/Libraries Requires rules: s!(.*Req.*)liblcms2-devel( |,|}|$)!\1liblcms2-devel\2!g; s!(.*Req.*)libmpg123-devel( |,|}|$)!\1libmpg123-devel\2!g; s!(.*Req.*)libpng16( |,|}|$)!\1libpng15\2!g; s!(.*Req.*)libudev-devel( |,|}|$)!\1libudev-devel\2!g; s!(.*Req.*)libv4l-devel( |,|}|$)!\1libv4l-devel\2!g; s!(.*Req.*)rpm-build-intro( |,|}|$)!\1rpm-build-intro\2!g; Group rules: $ /srv/builder-robot/Projects/etersoft-build-utils/bin/rpmbsh git.eter -b p8 /tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec Note: run from source tree, datadir=/srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild, sysconfdir=/srv/builder-robot/Projects/etersoft-build-utils/etc LISTNAMES=/tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec LISTARGS=-b p8 Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P add_changelog: /tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec: version "3.3-alt0.M80P.1" unchanged, skipping skip changelog editing without EDITOR var LISTNAMES=/tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec ARGS= Just packing wine-vanilla-3.3-alt0.M80P.1.src.rpm $ nice 9 rpmbuild --quiet '--define=_topdir /tmp/.private/builder-robot/tmp.pCojSnwt8e' --quiet /tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec -bs --nodeps --target x86_64 Building target platforms: x86_64 Building for target x86_64 Wrote: /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm $ time /srv/builder-robot/Projects/etersoft-build-utils/bin/myhsh -M80P /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm Note: run from source tree, datadir=/srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild, sysconfdir=/srv/builder-robot/Projects/etersoft-build-utils/etc LISTNAMES=/tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm LISTARGS= Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P List of packages for build: /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm $ sisyphus_check --no-check=nvr,gpg,packager,buildtime --files /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm Apt sources from /etc/eterbuild/apt/apt.conf.M80P: rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/x86_64 classic rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/noarch classic rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/x86_64-i586 classic rpm [etersoft] file:/var/ftp/ pub/Etersoft/LINUX@Etersoft/p8/branch/x86_64 addon rpm [etersoft] file:/var/ftp/ pub/Etersoft/LINUX@Etersoft/p8/branch/noarch addon rpm-dir file:/var/ftp/pub/Etersoft/Wine-vanilla/3.3/x86_64/ALTLinux p8 main Build in hasher: /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm (arg: --mountpoints=/proc,/dev/pts --no-sisyphus-check=nvr,gpg,packager,buildtime --apt-config=/tmp/.private/builder-robot/apt.conf.M80P --target x86_64 --with-stuff --build-args " --define '_unpackaged_files_terminate_build 1'", distro: M80P, hasherdir: /tmp/.private/builder-robot/hasher-M80P-64) $ /usr/bin/hsh --mountpoints=/proc,/dev/pts --no-sisyphus-check=nvr,gpg,packager,buildtime --apt-config=/tmp/.private/builder-robot/apt.conf.M80P --target x86_64 --with-stuff --build-args ' --define '_unpackaged_files_terminate_build 1'' -- /tmp/.private/builder-robot/hasher-M80P-64 /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm hsh: /usr/libexec/hasher-priv/getconf.sh: cannot access getconf helper. !!!!!!! Hasher: FAILED FAILED FAILED !!!!!!!!! Build failed with /tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm, built only Command exited with non-zero status 1 7.27user 1.22system 0:13.45elapsed 63%CPU (0avgtext+0avgdata 147692maxresident)k 81728inputs+778912outputs (277major+241334minor)pagefaults 0swaps removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS/wine-vanilla-3.3-alt0.M80P.1.src.rpm' Sun Mar 4 04:59:54 MSK 2018 ------------------------------- Error in rpmbph: Can't build removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e/BUILD' removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS/wine-vanilla.spec' removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SPECS' removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES/wine-vanilla-3.3-icons.tar' removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES/wine-vanilla-3.3.tar' removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES/winetricks' removed '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES/wine-vanilla-3.3-desktop.tar' removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SOURCES' removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e/SRPMS' removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e/RPMS' removed directory '/tmp/.private/builder-robot/tmp.pCojSnwt8e' WARNING: Do not hashered Note: run from source tree, datadir=/srv/builder-robot/Projects/etersoft-build-utils/share/eterbuild, sysconfdir=/srv/builder-robot/Projects/etersoft-build-utils/etc Target ALT Linux system: p8, use /etc/eterbuild/apt/apt.conf.M80P Apt sources from /etc/eterbuild/apt/apt.conf.M80P: rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/x86_64 classic rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/noarch classic rpm [p8] file:/var/ftp/ pub/ALTLinux/p8/branch/x86_64-i586 classic rpm [etersoft] file:/var/ftp/ pub/Etersoft/LINUX@Etersoft/p8/branch/x86_64 addon rpm [etersoft] file:/var/ftp/ pub/Etersoft/LINUX@Etersoft/p8/branch/noarch addon rpm-dir file:/var/ftp/pub/Etersoft/Wine-vanilla/3.3/x86_64/ALTLinux p8 main Cleanup hasher in /tmp/.private/builder-robot/hasher-M80P-64... $ /usr/bin/hsh --cleanup-only /tmp/.private/builder-robot/hasher-M80P-64 --apt-config=/tmp/.private/builder-robot/apt.conf.M80P --target x86_64 --with-stuff removed '/tmp/.private/builder-robot/hasher-M80P-64/BUILD' removed '/tmp/.private/builder-robot/hasher-M80P-64/pid' STEP * [04:59:54] copying sources of broken package ... Skip conf. source copying STEP * [04:59:54] umount ... STEP * [04:59:54] copying log from broken build ...